
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X200-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 200mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X200-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 200 mm stroke that can be fine-tuned backward by up to 75 mm, creating a usable travel window of 125 to 200 mm.
This adjustable design allows for precise end-position tuning at commissioning without swapping the cylinder or adding external stops. The rear screw acts purely as a travel stop for deceleration alongside the standard air cushions; it is not a locking mechanism and will not hold a load without live air pressure. For position holding without air, an external rod lock or related SAIL lock cylinder is required.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X200-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop for varying package sizes on a packaging line without swapping hardware, utilizing the full 75 mm adjustment window.
Fine-tune the retract position during initial commissioning to achieve precise alignment, avoiding the need for external stopper blocks.
Adjust the stroke from 125 to 200 mm on the fly to accommodate different product lengths moving through a handling system.
Select this 40 mm bore when an application requires a broad 125 to 200 mm adjustable travel range to accommodate frequent product-size changeovers on a line. If your setup needs less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa, while stepping up to a 50 mm bore provides 982 N for heavier payloads. Because this model features a 200 mm stroke, the 16 mm rod handles standard side loads adequately, but any application approaching the 1200 mm max standard stroke limit will require an external guide.
To match this ISO 15552 dimensionally interchangeable cylinder for a replacement, verify the 40 mm bore, 200 mm nominal stroke, 75 mm adjustment range, PT port thread, and carbon steel rod. Note that SAIJ supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found on standard variants. This specific SKU does not include a magnet, so it requires a physical switch or a separate -S variant to use AirTAC CMSE reed or DMSE electronic sensors.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 879 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 75 mm from the 200 mm nominal length, providing a usable travel range of 125 to 200 mm. The adjuster acts as a stop and does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.