verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X210-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 210mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke210 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$82.31 $89.81Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-40

The AirTAC SAIJ40X210-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 170-210 mm usable travel window by allowing you to dial back the 210 mm nominal stroke by up to 40 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches.

This model uses a 16 mm carbon steel rod with an M12x1.25 thread, offering good rigidity for moderate side loads. The rear adjuster acts strictly as a mechanical stop to fine-tune the retract end position during commissioning; it is not a lock and will not hold a load without live air pressure. For true load-holding, consider the SAIL or BSAI series.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X210-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke210 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×210Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-40 Is Used

tune

Machine Changeover

Dial in the 170-210 mm travel window during product size transitions without changing the cylinder or adding external stops.

precision_manufacturing

End-Position Tuning

Fine-tune the retract end-stop during commissioning to perfect pressing or clamping depth on the assembly line.

conveyor_belt

Variable Diverter Stops

Adjust the retract position on the fly to handle different package sizes moving down a conveyor system.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-40 the Right Cylinder?

Choose this adjustable-stroke model when your machine setup requires variable end-stops or product changeover flexibility without physically swapping cylinders or adding external stopper blocks. If less force is acceptable, dropping to the 32 mm bore provides 563 N. Because this 210 mm stroke exceeds 200 mm, ensure an external guide supports long unsupported loads to prevent rod bending.

To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 40 mm bore, 210 mm stroke, 40 mm adjustment range, PT G1/4 port thread, and your required mounting style. SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, intentionally omitting FB, CA, CB, and CR brackets.

AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-40 FAQ

The rear adjusting screw lets you mechanically shorten the 210 mm nominal stroke by up to 40 mm, creating a 170-210 mm travel window. The adjuster is a travel stop, not a lock, so it cannot hold a load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X210-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ40X210-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.