
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X280-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 280mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X280-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 240 to 280 mm. The integrated -S magnet enables seamless position detection using AirTAC CMSE reed or DMSE electronic solid-state sensors housed within the dual-side barrel grooves.
This adjustable-stroke model allows operators to fine-tune the retract end-position during commissioning or product changeovers without swapping the cylinder or adding external stops. It features variable air cushions at both ends to decelerate the load smoothly, but the rear adjuster acts strictly as a travel stop and does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X280-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 280 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 240 to 280 mm retract position on packaging lines when switching between different carton sizes without changing hardware.
Fine-tune the final end-of-stroke position during machine commissioning to perfectly mate with tooling, preventing impact damage.
Adjust the rear stop screw on the fly to accommodate different material lengths in light-duty bending or forming stations.
Conversely, lighter duties can utilize the 32 mm bore providing 402 N. The adjustable 240-280 mm window is perfect for lines running multiple product sizes, whereas a fixed-stroke SAI cylinder is better suited for dedicated single-purpose machinery.
Because the 280 mm stroke creates an extended lever arm, ensure external guiding is used to counter side-loading on the 16 mm rod. To replace an ISO 15552 cylinder, match the 40 mm bore, 280 mm nominal stroke, 40 mm adjustment range, PT port thread, and -S magnet. For load-holding without continuous air pressure, consider the SAIL pneumatic lock or BSAI clamp-lock variants, as the SAIJ adjuster is not a braking device. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 40 mm, creating a usable travel window of 240 to 280 mm. This stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.