verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-75

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X290-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 290mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke290 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$89.29 $96.79Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-75

The AirTAC SAIJ40X290-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to dial back the 290 mm nominal travel by up to 75 mm. This creates a 215-290 mm usable positioning window, letting you fine-tune the retract end-position at commissioning without swapping the hardware. It delivers 628 N of pull force at 0.5 MPa and uses a 16 mm carbon steel rod with an M12x1.25 thread.

The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches. The rear adjuster acts purely as a travel stop and does not hold the load without live air. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found on other series.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-75 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X290-75
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke290 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-75

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×290Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-75 Is Used

tune

Machine Setup Tuning

Dial in the exact retract position within the 215-290 mm window during commissioning without adding external mechanical stops.

settings_input_component

Product Changeover

Quickly adjust the end-stop distance on a packaging line when switching to a different product size.

precision_manufacturing

Variable End-Positioning

Fine-tune the retract stroke by up to 75 mm to accommodate varying material thicknesses or tooling offsets.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-75 the Right Cylinder?

Choose this 40 mm bore when a 32 mm bore falls short on thrust (the 32 mm offers 345 N pull at 0.5 MPa) but you want a lighter footprint than a 50 mm bore. An adjustable stroke is preferred over a fixed SAI when you need variable end-stops for product changeovers or machine setup. For load-holding without continuous air pressure, use an external rod lock or pilot-operated check valve, or select the SAIL or BSAI series. This model uses a PT tapered port thread. Since the stroke is 290 mm, ensure an external guide supports the load to prevent excessive side-loading on the rod.

AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-75 FAQ

At 0.7 MPa, the push force increases to 879 N.

The rear adjuster screw lets you shorten the effective stroke from its 290 mm nominal length by up to 75 mm, providing a usable travel window of 215 to 290 mm. The adjuster functions as a travel stop and does not lock the load without air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X290-75

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ40X290-75 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.