verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X45-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 45mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke45 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.62 $76.12Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S

The AirTAC SAIJ40X45-40-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. Equipped with a -S magnet for CMSE reed or DMSE electronic sensors, it provides a nominal 45 mm stroke that can be dialed back by up to 40 mm, yielding a highly versatile 5 to 45 mm usable travel window for exact end-position tuning.

The rear adjuster acts purely as a mechanical stop to fine-tune the travel end without live air holding the load, while the extruded aluminum barrel integrates sensor grooves on both sides.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke45 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×45Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S Is Used

settings_input_component

Machine Setup Tuning

Dial in the exact 5 to 45 mm end-stop during commissioning without swapping cylinders or adding external stops.

conveyor_belt

Product Changeover

Quickly adjust the travel window on packaging lines when handling different product sizes on the fly.

precision_manufacturing

End-Position Trimming

Use the rear mechanical stopper to fine-tune the retract position for precise assembly operations.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S the Right Cylinder?

Choose this 40 mm bore when an application requires precise variable end-stops within a short travel range, as opposed to a fixed-stroke SAI model. If your setup needs slightly less force, stepping down to a 32 mm bore yields 402 N at 0.5 MPa; stepping up to a 50 mm bore provides 982 N.

For an exact ISO 15552 replacement, match the 40 mm bore, 45 mm stroke, 40 mm adjustment, PT port thread, and -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2. Because the stroke is under 300 mm, side-load stress is minimal, though the 16 mm rod still handles standard loads effectively.

AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S FAQ

The rear adjuster acts as a mechanical stop that lets you trim the 45 mm nominal stroke back by up to 40 mm, creating a 5 to 45 mm usable travel window. It is a stop, not a lock, so it will not hold the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X45-40S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ40X45-40S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.