verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X50-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 50mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke50 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$65.83 $73.33Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40

The AirTAC SAIJ40X50-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because the adjustment code is 40 mm on a 50 mm nominal stroke, the usable travel window spans 10 to 50 mm. This built-in adjuster acts as a mechanical stop at the retract end, allowing you to dial in the exact end position without adding external stops.

This 40 mm bore cylinder uses a 16 mm rod and M12x1.25 rod thread, which handles side loads better than smaller bores. It shares the standard SAI sensor groove on both sides, though adding a magnet requires the -S option to work with CMSE reed or DMSE electronic sensors. The mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB and CA options.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X50-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke50 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×50Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40 Is Used

tune

Machine Setup Tuning

Dial in the exact 10 to 50 mm retract position during commissioning without machining new hard stops.

settings_input_component

Product Changeover

Quickly adapt the end-of-stroke position on a packaging line when switching to a different carton size.

precision_manufacturing

Variable End Stops

Use the 40 mm adjustment range to test multiple retraction depths on a clamping fixture before finalizing the travel.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40 the Right Cylinder?

Choose this SAIJ40X50-40 when your machine requires a variable end-stop within a 10 to 50 mm travel window. If you need less force, the 32 mm bore provides 563N at 0.7 MPa, while stepping up to a 50 mm bore yields 1374N for heavier loads. An adjustable stroke is ideal for product changeovers where the retract position shifts slightly, saving the cost of swapping a fixed-stroke SAI cylinder.

Remember that the rear adjuster and air cushions only decelerate the load; they do not hold position without live air. For fail-safe load holding, consider an external rod lock or the SAIL cylinder series. To replace an ISO 15552 cylinder, match the 40 mm bore, 50 mm stroke, 40 mm adjustment, PT port, and your required mounting style.

AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40 FAQ

The rear adjuster lets you mechanically shorten the retract stroke by up to 40 mm. This creates a usable travel window from 10 mm to 50 mm, allowing precise end-position tuning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X50-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ40X50-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.