
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X55-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 55mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X55-50 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 55 mm stroke by up to 50 mm. This yields a highly versatile 5-55 mm usable travel window, perfect for dialing in exact end positions during machine commissioning without swapping out the unit. It features a carbon steel piston rod and a PT tapered G1/4 port.
The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches if needed later. It uses the standard SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), deliberately omitting the FB, CA, CB, and CR brackets to streamline your setup options.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X55-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 55 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 5 to 55 mm end position during commissioning or product size changeovers without physically swapping the cylinder.
Use the 50 mm rear adjuster to fine-tune the retract distance on the fly, eliminating the need to bolt on custom external stops.
Ideal for test rigs and automated fixtures where the precise stroke length must be tweaked repeatedly before finalizing the mechanical layout.
The 50 mm adjustment range on a 55 mm stroke is ideal for prototyping cells or product changeovers where the exact end-stop distance varies, saving you from machining custom external stops or buying multiple fixed-stroke SAI cylinders.
Remember that the rear adjuster functions strictly as a travel stop to fine-tune deceleration and end position; it does not hold the load without live air pressure. For true fail-safe load holding, consider an SAIL air-released lock or BSAI clamp-lock cylinder instead. To match this ISO 15552 replacement exactly, specify: 40 mm bore, 55 mm stroke, 50 mm adjustment, PT G1/4 port, standard carbon rod, no magnet, and your required mounting bracket.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
It features a rear adjusting screw that lets you shorten the effective stroke by up to 50 mm. With a nominal 55 mm stroke, this creates a usable travel window of 5 to 55 mm, which you can fine-tune during commissioning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.