
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X65-20 is a double-acting, double-rod profile cylinder that is dimensionally interchangeable per ISO 15552. It features a rear-mounted stroke adjuster that allows you to dial back the nominal 65 mm travel by up to 20 mm, creating a precise 45-65 mm usable window for end-position tuning at commissioning.
Unlike a fixed-stroke SAI cylinder, this adjustable model eliminates the need to swap components or bolt on external stops during product changeovers. The extruded aluminum barrel includes dual sensor grooves for mounting CMSE reed or DMSE electronic switches, though this specific configuration omits the -S magnet. Remember that the rear adjuster acts only as a mechanical stop to set deceleration; it does not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 45-65 mm travel window during product size transitions without physically swapping the cylinder or adding external shims to the fixture.
Fine-tune the retract end-position precisely during commissioning using the rear adjuster screw, ensuring perfect alignment before final lockdown.
For operations that require true load-holding without continuous air pressure, a standard SAIJ will not suffice, and you should look toward the SAIL air-released lock or BSAI clamp-lock series.
When replacing an ISO 15552 cylinder, match the 40 mm bore, 65 mm nominal stroke, 20 mm adjustment range, PT tapered port thread, and standard carbon steel rod. The SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. Because the stroke is under 300 mm, side-load stress on the 16 mm rod and M12x1.25 thread is minimal, though an external guide is still recommended for heavy lateral loads.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
The rear adjuster acts as a mechanical stop that shortens the effective travel. For this model, you can trim the 65 mm nominal stroke back by up to 20 mm, giving a usable travel window of 45 to 65 mm. It only sets the end position and does not lock the load without live air.
At the maximum 1.0 MPa pressure, it can deliver up to 128 kgf of thrust.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.