verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X65-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 65mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke65 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$68.36 $75.86Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30

The AirTAC SAIJ40X65-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that trims the 65 mm nominal travel back by up to 30 mm. This creates a usable 35-65 mm end-position window, allowing you to dial in the exact retract distance during commissioning without swapping out the unit.

The extruded aluminum barrel integrates sensor grooves on both sides for CMSE reed or DMSE electronic switches. It features a 16 mm carbon steel rod with an M12x1.25 thread, providing robust resistance to side loads. The mounting interface supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets, deliberately omitting the FB, CA, CB, and CR styles found on other variants.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X65-30
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke65 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×65Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30 Is Used

tune

Product Changeovers

Dial in the 35-65 mm travel window on the fly to accommodate slight length variations between different product batches without changing the cylinder.

settings_input_component

Commissioning Calibration

Fine-tune the retract end-position during initial machine setup, using the rear stopper to perfect the alignment of downstream pick-and-place movements.

precision_manufacturing

Variable End-Stop Clamping

Adjust the effective stroke to apply precise 628 N clamping force on delicate workpieces by controlling the exact final position of the rod.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30 the Right Cylinder?

The integrated 30 mm adjustment range is ideal for machines that require variable end-stops for product changeovers, replacing the need to physically swap out a fixed-stroke SAI cylinder. Keep in mind the rear adjuster functions strictly as a travel stop, not a lock; the SAIJ40X65-30 cannot hold a load without live air pressure, so consider an SAIL or BSAI cylinder if true fail-safe holding is required.

When matching this for an ISO 15552 replacement, verify the 65 mm stroke, the 30 mm adjustment requirement, the PT tapered port thread, and the absence of a magnet (-S). Because the stroke is under 300 mm, side-load stress on the M12x1.25 rod remains manageable without an external guide, though standard alignment practices still apply.

AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30 FAQ

A rear adjusting screw acts as a mechanical stopper, allowing you to shorten the 65 mm nominal stroke by up to 30 mm. This provides a usable travel window of 35-65 mm, which can be fine-tuned during commissioning without replacing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X65-30

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ40X65-30 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.