verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40

The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X650-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 650mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ40 mm
  • Stroke650 mm
  • Port sizeG1/4
  • Acting typeDouble acting
  • Rod threadM12×1.25
  • CushionAdjustable, 30 mm
$129.10 $136.60Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ40 stroke, mounting and version on one page All SAIJ40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40

The AirTAC SAIJ40X650-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits a usable travel window of 610 to 650 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

This adjustable unit omits the FB, CA, CB, and CR mounting options, offering only the Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces. The rear screw acts purely as a travel stop for commissioning changes and cannot hold a load without live air pressure. For position holding without continuous air, an external pilot-operated check valve or a SAIL lock cylinder is required.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40 Technical Specifications

ModelAirtac SAIJ40 Adjustable Cylinder SAIJ40X650-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ40 mm
Stroke650 mm
Acting typeDouble acting
Port sizeG1/4
Rod threadM12×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø40mm)

PressurePush forcePull force
0.5 MPa528 N528 N
0.7 MPa739 N—
Max (@1.0 MPa)108 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40

SAIISO 15552 profile-barrel cylinder series.
40Bore size in mm.
×650Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40 Is Used

settings_input_component

Product Changeover

Dial in the 610 to 650 mm travel window during line changeovers to accommodate different package lengths without replacing the cylinder.

precision_manufacturing

End-Position Tuning

Fine-tune the retract stop during commissioning to dial in exact mechanical contact, eliminating the need to fabricate custom external shims.

conveyor_belt

Variable End Stops

Adjust the stroke on the fly for diverter arms or sorting gates that need to hit slightly different positions based on the product run.

Is the Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40 the Right Cylinder?

The 40 mm adjustment code is chosen over a fixed SAI cylinder when you need to fine-tune the end position during machine setup or product changeover without swapping physical components.

Because the 650 mm stroke is substantial, the 16 mm carbon steel rod will still require an external guide to prevent excessive side-loading and premature wear. To match this ISO 15552 footprint, specify the 40 mm bore, 650 mm stroke, 40 mm adjustment, PT G1/4 port, and the appropriate mounting interface. Note that because no magnet is specified, CMSE reed or DMSE electronic sensors cannot be used without changing the configuration.

AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40 FAQ

At the maximum operating pressure of 1.0 MPa, the push force reaches 1130 N.

The rear adjuster screw lets you shorten the 650 mm nominal stroke by up to 40 mm, creating a 610 to 650 mm usable travel window. It acts as a mechanical stop to tune the end position and is not a lock, meaning the cylinder cannot hold a load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ40 Adjustable Cylinder SAIJ40X650-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ40X650-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.