
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X700-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 700mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X700-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits precise end-position tuning. With a nominal 700 mm stroke and a 40 mm adjustment range, it provides a usable travel window of 660 to 700 mm. This allows you to dial in the exact retract distance during commissioning without adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible positioning of CMSE or DMSE switches.
The carbon steel rod with an M12x1.25 thread offers solid durability, while the PT (tapered) G1/4 port ensures a reliable pneumatic connection. It features variable air cushions at both ends to decelerate the moving load smoothly.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X700-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 660-700 mm retract end-stop during product size transitions without physically swapping the cylinder or adding external mechanical stops.
Dial in the exact 40 mm adjustment range at commissioning to compensate for mechanical tolerances and achieve precise positioning of the tooling.
Adjust the ejection stroke on a packaging line to handle different carton sizes, using the rear screw to set the exact retraction point.
If you need significantly less force, stepping down to a 32 mm bore yields 402 N, whereas moving up to a 50 mm bore provides 982 N. An adjustable stroke is highly beneficial for machine setups requiring variable end stops or product changeovers, offering flexibility that a fixed-stroke SAI cylinder cannot match.
Because the nominal stroke is 700 mm, the extended rod length means you must use an external guide to prevent excessive side-load wear on the rod seals. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for fail-safe load holding, consider an AirTAC SAIL or BSAI cylinder. For ISO 15552 replacement, match the 40 mm bore, 700 mm stroke, 40 mm adjustment, G1/4 PT ports, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
At the maximum pressure of 1.0 MPa, the push force reaches 1130 N.
The rear adjuster screw lets you shorten the effective stroke by up to 40 mm, creating a usable travel window between 660 and 700 mm. The adjuster functions as a mechanical stop to set the end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.