
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X85-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 85mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X85-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 55-85mm usable travel window, allowing you to dial in the exact end position without adding external stops.
This extruded aluminum barrel design includes sensor grooves on both sides for CMSE or DMSE switches, though this standard configuration omits the magnet. The 16mm carbon steel rod and M12x1.25 thread provide robust resistance to side loads, while the PT tapered port ensures a secure pneumatic connection.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X85-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 55-85mm travel window during product size transitions to set precise new end stops rapidly.
Fine-tune the retract position during initial machine commissioning without machining external spacers.
Adjust the cylinder's effective stroke on the fly to accommodate varying material thicknesses in clamping tasks.
Choose this adjustable-stroke model when your machine setup requires fine end-position tuning during commissioning or product changeover, bypassing the need to swap a fixed-stroke SAI cylinder. Remember that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For load-holding requirements, consider the SAIL or BSAI series. To match this ISO 15552 replacement exactly, verify the 85mm stroke, 30mm adjustment, PT port, and Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting set.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 879N.
The rear adjuster allows you to shorten the 85mm nominal stroke by up to 30mm, creating a usable travel window of 55-85mm to fine-tune the end position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.