
The AirTAC SAIJ40 Adjustable Cylinder SAIJ40X95-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø40mm bore and 95mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ40X95-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 30 mm. This yields a usable stroke window of 65 to 95 mm, letting you dial in the exact retract end-position during commissioning without swapping out the barrel or adding external stops.
This 40 mm bore variant uses a 16 mm carbon steel rod with an M12x1.25 thread, providing a robust interface that handles moderate side loads well. The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE solid-state switches. It features a PT tapered port thread (G1/8) and adjustable air cushions at both ends to soften impact, though the adjuster acts only as a travel stop and will not hold the load without live air pressure.
| Model | Airtac SAIJ40 Adjustable Cylinder SAIJ40X95-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø40 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M12×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 528 N | 528 N |
| 0.7 MPa | 739 N | — |
| Max (@1.0 MPa) | 108 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 40 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the retract end-stop for different product sizes on a packaging line using the 30 mm adjustment window.
Fine-tune the 65-95 mm travel during commissioning to absorb mechanical tolerances without machining external stopper blocks.
The adjustable stroke is ideal for machine changeovers where the retract end-stop needs fine-tuning across a 65-95 mm window. Unlike a fixed-stroke SAI cylinder, this model lets you set the exact retract position on the fly. To match this replacement exactly, verify the 95 mm stroke, 30 mm adjustment range, PT port thread, and your required mounting accessory from the SAIJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the total stroke is under 300 mm, external side-load guides are less critical, but the 16 mm rod still requires proper alignment to prevent premature seal wear. Remember that the rear adjuster is a stop, not a lock; for load-holding without live air, consider an AirTAC SAIL or BSAI cylinder.
AirtacDistr lists every SAIJ40 order code with its price on one page at https://airtacdistr.com/products/airtac-saij40-adjustable-cylinder
Quick checklist
It features a rear external adjusting screw that acts as a mechanical stop, allowing you to shorten the nominal 95 mm stroke by up to 30 mm. This creates a usable travel window of 65 to 95 mm, which can be fine-tuned during setup without replacing the cylinder.
It is dimensionally interchangeable per ISO 15552 standards and supports a mounting subset including Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.