verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX100-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke100 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$197.70 $205.20Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100

The AirTAC SAIJ80X100-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The external stopper allows you to trim the nominal 100mm travel back by up to 100mm, creating a 0-100mm usable window for precise end-position tuning.

This adjustable feature means you can fine-tune the retract position at commissioning or during product changeover without swapping the cylinder or adding external stops. The adjuster acts purely as a travel stop, not a lock, so it will not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.

Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100 Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke100 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100 Is Used

settings_input_component

Machine Setup Tuning

Dial in the exact retract distance from 0 to 100mm during initial commissioning without machining external stopper blocks.

view_module

Product Changeover

Quickly adapt the stroke window on a packaging line when switching to a different product size or thickness.

precision_manufacturing

Variable End Stops

Use the built-in rear stopper to set precise end-of-travel positions for repetitive manufacturing tasks.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100 the Right Cylinder?

An adjustable stroke is selected over a fixed SAI when the exact end-of-stroke position needs variable end-stops or commissioning fine-tuning.

As a dimensionally interchangeable ISO 15552 cylinder, it replaces units of the same bore, 100mm stroke, 100mm adjustment, PT ports, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounts (note: FB, CA, CB, and CR are omitted from the SAIJ mounting set). Because it lacks a magnet (-S), it does not support CMSE or DMSE sensors.

AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100 FAQ

The rear adjuster screw lets you shorten the effective travel by up to 100mm from the nominal 100mm stroke, providing a 0-100mm usable window to set the exact retract end-position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-100

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ80AX100-100 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.