
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX100-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X100-20 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 80 to 100 mm, allowing you to dial back the nominal 100 mm stroke by up to 20 mm during commissioning.
This model features a SUS420J2 stainless steel rod for enhanced durability against lateral stress, paired with PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that the rear adjuster functions strictly as a travel stop to set deceleration endpoints, not as a locking mechanism to hold loads without live air pressure.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the exact end-of-stroke position within the 80-100 mm window during initial machine commissioning without needing external shims.
Quickly adjust the travel stop for different product sizes on a conveyor line, saving time on mechanical reconfiguration.
Dial in the precise retract distance for a pressing or clamping operation, ensuring consistent contact without overtravel.
Choose this 80 mm bore when an application requires over 2200 N of pulling force at 0.5 MPa, or step down to a 63 mm bore if 1402 N is sufficient. The adjustable stroke is highly beneficial for product changeovers on a line, enabling variable end-stops without physically swapping the cylinder or adding external stops. For operations needing true load-holding without continuous air supply, consider the SAIL or BSAI series instead.
This SAIJ model uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. It is dimensionally interchangeable with ISO 15552 cylinders. Since the stroke is 100 mm, side-load risks are manageable, but an external guide is still recommended for heavy unsupported loads.
AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 3518 N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective stroke by up to 20 mm, creating an 80 to 100 mm usable travel window. It sets the end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.