
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX100-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X100-30 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 25 mm rod and a usable travel window of 70-100 mm, allowing you to dial back the nominal 100 mm stroke by up to 30 mm during commissioning. This built-in stopper eliminates the need to swap cylinders or add external stops when fine-tuning end positions.
The rod is constructed from SUS420J2 stainless steel for enhanced durability against side loads. It features PT tapered ports and dual-side sensor grooves, though a magnet is not specified for this configuration.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 70-100 mm travel window during initial commissioning or product size changes without physically swapping out the cylinder.
Dial in the exact retract position for machining or clamping tasks, relying on the rear stopper to set the precise end-point.
Adapt the stroke on packaging lines to handle varying carton sizes, using the 30 mm adjustment range to time the diversion push perfectly.
The adjustable 70-100 mm window is ideal for product changeovers on a line, letting you set variable end-stops on the fly. For any application requiring the load to be held without live air pressure, note that the rear adjuster acts only as a travel stop and not a lock; you should consider an external rod lock or related types like SAIL or BSAI.
When matching ISO 15552 mounting interfaces, specify the 80 mm bore, 100 mm stroke, 30 mm adjustment, PT G3/8 port, and the SUS420J2 rod material. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR options.
AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 513 kgf.
The rear adjuster screw acts as a mechanical stop that trims the retract stroke. For this SAIJ80X100-30 model, it creates a usable travel window of 70-100 mm, but it is a stop only and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.