
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX100-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X100-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that creates a 60-100 mm usable travel window from the 100 mm nominal stroke. It delivers a robust 2268 N pull force at 0.5 MPa and utilizes a 25 mm SUS420J2 stainless steel rod with an M20x1.5 thread to handle high side loads.
This adjustable model uses PT tapered ports and omits the FB, CA, CB, and CR mounting options, retaining the standard SAIJ set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The rear adjuster acts purely as a travel stop for end-position tuning and does not hold the load without live air pressure.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX100-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 60-100 mm retract distance during commissioning to perfectly align product ejection without mechanical spacers.
Quickly adapt the stroke end-point for different package sizes on a conveyor line using the rear adjustment screw.
Fine-tune the pressing depth of components during automated assembly runs to compensate for material variations.
Choose this 80 mm bore when your application requires more force than the 50 mm bore (825 N pull at 0.5 MPa) but less than the 100 mm bore (3681 N pull). The 40 mm adjustment range is ideal for product-size changeovers on a packaging line, allowing you to fine-tune the retract end position without swapping the cylinder or adding external stops. For load-holding without continuous air pressure, select the SAIL or BSAI series instead, as the SAIJ adjuster is not a lock. When replacing an ISO 15552 cylinder, match the 80 mm bore, 100 mm stroke, 40 mm adjuster, PT G3/8 ports, and the required mounting interface.
AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder
Quick checklist
At 0.7 MPa the push force increases to 3518 N.
The rear adjuster screw lets you shorten the effective stroke from 100 mm down to 60 mm, creating a 60-100 mm travel window for precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.