verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX110-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 110mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke110 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$206.54 $214.04Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40

The AirTAC SAIJ80X110-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 110 mm travel by up to 40 mm for a precise 70-110 mm usable window.

This SKU features a SUS420J2 stainless steel piston rod for enhanced corrosion resistance and utilizes PT tapered G3/8 ports. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. It offers a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.

Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40 Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke110 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×110Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40 Is Used

tune

Machine Changeover Setup

Dial in the exact 70-110 mm travel distance during product size transitions on a packaging line without physically replacing the cylinder or repositioning hard stops.

settings_input_component

Commissioning Stroke Calibration

Safely trim the effective stroke by up to 40 mm during initial machine setup to clear mechanical interferences and perfect the timing sequence.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40 the Right Cylinder?

Choose this 80 mm bore adjustable cylinder when your assembly requires exact end-position tuning during commissioning or product changeover without swapping out the physical cylinder or adding bulky external stops. If your application demands less force, stepping down to a 63 mm bore yields 1402 N of pull force at 0.5 MPa; if more thrust is needed, a 100 mm bore provides 3681 N of pull force.

When seeking an ISO 15552 replacement, match the 80 mm bore, 110 mm nominal stroke, 40 mm adjustment range, PT G3/8 port, and the specified mounting interface. Note that the rear adjuster functions strictly as a mechanical travel stop that works with the air cushions to decelerate the load, not as a locking device. For applications requiring true position holding without live air pressure, consider the AirTAC SAIL or BSAI series.

AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40 FAQ

At its maximum 1.0 MPa pressure, it can deliver up to 513 kgf of push force.

The rear adjuster acts as an external stopper that lets you shorten the 110 mm nominal stroke by up to 40 mm, providing a usable travel window of 70 to 110 mm. It sets the end position and works with the air cushions to decelerate the load, but it does not lock the position without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ80AX110-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.