
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80AX110-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 110mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X110-75 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a nominal 110 mm stroke that can be dialed back by up to 75 mm, creating a highly flexible 35-110 mm usable travel window. This on-the-fly tuning capability allows operators to set precise end positions during commissioning or product changeovers without swapping out the physical actuator.
It features a SUS420J2 stainless steel rod for enhanced durability against moisture, PT tapered port threads for a tight seal, and variable air cushions at both ends to decelerate moving masses smoothly.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80AX110-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for packaging lines where the rear 75 mm adjuster quickly shifts the 110 mm stroke endpoint to accommodate different carton sizes without changing the cylinder.
Allows engineers to dial in the exact 35 to 110 mm travel distance during machine setup, ensuring perfect alignment without adding external mechanical stops.
Choose this 80 mm bore model when an application requires heavy thrust but also demands variable end-stops for different product sizes on the same line. If you need slightly less force, stepping down to a 63 mm bore yields 1559 N at 0.5 MPa; if you require more power, a 100 mm bore provides 3927 N. The SAIJ80X110-75 is selected specifically over a fixed-stroke SAI cylinder when that 35-110 mm travel window prevents the need to inventory multiple actuators for slightly different jobs.
Because the 110 mm stroke is relatively short, side-loading is less severe than in long-travel setups, but the 25 mm rod and M20x1.5 thread still require an external guide for heavy lateral loads. Remember that the rear adjuster acts only as a mechanical stop to set the travel end; it does not hold the load without live air. For true fail-safe load holding without pneumatic pressure, use an SAIL air-released lock, a BSAI clamp-lock, or an external rod lock valve. This profile cylinder is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder
Quick checklist
A rear external screw acts as a mechanical stop, allowing you to shorten the effective travel from 110 mm down to a minimum of 35 mm. This stopper sets the end position but does not lock the load without live air pressure.
At 0.9 MPa, the push force increases to 4523 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.