
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX90-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 90mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X90-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The SUS304 stainless steel rod and PT tapered ports make it highly durable for demanding industrial environments.
Because this unit includes the -S magnet, it integrates seamlessly with AirTAC CMSE reed and DMSE electronic solid-state sensors housed in the dual-side barrel grooves. The rear adjuster functions strictly as a mechanical stop to fine-tune the retract position, meaning it cannot hold a load without live air pressure. For applications requiring true load-holding, consider the SAIL or BSAI locking variants.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 80 to 90mm window during machine commissioning without changing the cylinder or adding external stops.
Quickly adjust the stroke by up to 10mm on packaging lines to accommodate varying product lengths on the fly.
The adjustable 10mm end-stop is perfect for setups requiring variable end positions or product-size changeovers, eliminating the need to swap out a fixed-stroke SAI cylinder or bolt on external stops. When replacing an ISO 15552 cylinder, match the 80mm bore, 90mm stroke, G3/8 PT ports, and the -S magnet requirement.
Although the 90mm stroke is relatively short, the 25mm rod diameter and M20x1.5 rod thread provide excellent structural rigidity. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR mounts. Operating speed ranges from 30 to 800mm/s, regulated by variable air cushions at both ends.
AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder
Quick checklist
The rear mechanical adjuster acts as a stop, allowing you to shorten the nominal 90mm stroke by up to 10mm, creating an 80 to 90mm usable travel window. It is a travel stop, not a lock, so it will not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.