verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX90-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 90mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke90 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$197.70 $205.20Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20

The AirTAC SAIJ80X90-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. It provides a usable travel window of 70-90 mm, letting you dial back the nominal 90 mm stroke by up to 20 mm without adding external stops.

Equipped with a SUS304 stainless steel rod and PT tapered ports, this unit resists corrosion while ensuring a tight pneumatic seal. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. It supports a speed range of 30-800 mm/s and uses adjustable air cushions at both ends to decelerate the load smoothly.

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20 Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke90 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×90Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20 Is Used

tune

Machine Changeover

Quickly adjust the 70-90 mm travel window during product size changes on a packaging line without swapping out the entire actuator.

settings_input_component

Variable End-Stop Setup

Fine-tune the retraction end position at commissioning to achieve precise mechanical alignment without machining external stopper blocks.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20 the Right Cylinder?

The adjustable stroke is ideal for machine setups requiring variable end-stops during product changeovers, replacing the need for a fixed-stroke SAI cylinder. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Remember that the rear adjuster and air cushions act only as travel stops and deceleration devices; they do not hold the load without live air. For load-holding requirements without continuous pressure, consider an external rod lock or pilot-operated check valve. This model uses PT ports and a standard SUS304 rod, but it does not include a magnet for position sensing.

AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20 FAQ

At 0.7 MPa, the push force increases to 3518 N.

The rear adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from the nominal 90 mm down to 70 mm. This creates a 70-90 mm usable travel window for fine-tuning the end position during setup.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-20

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ80BX90-20 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.