verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX90-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 90mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke90 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$203.29 $210.79Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S

The AirTAC SAIJ80X90-75-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a broad usable travel window of 15 to 90 mm, letting you dial back the nominal 90 mm stroke by up to 75 mm during machine commissioning.

Built with a SUS304 stainless steel rod (option B) and PT tapered ports, it resists corrosion while handling high side loads. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed and DMSE electronic solid-state switches.

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke90 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×90Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S Is Used

settings_input_component

Variable End-Stop Positioning

Dial the stroke back from 90 mm to 15 mm to hit changing end-stops without re-engineering the machine layout.

factory

Product Size Changeover

Quickly adapt a production line to new package dimensions by turning the rear adjuster to shift the retraction point.

tune

Commissioning Fine-Tuning

Trim the travel window during setup to perfect the timing and avoid mechanical crashes before final lock-down.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S the Right Cylinder?

The adjustable rear stopper allows precise end-position tuning without swapping cylinders or adding external stops. Remember the adjuster acts only as a travel stop; it does not hold the load without live air. For pneumatic load-holding, consider the SAIL or BSAI series.

When replacing an ISO 15552 cylinder, match the 80 mm bore, 90 mm stroke, 75 mm adjustment, PT port thread, and the -S magnet. Because the 90 mm stroke is relatively short, standard side-loading concerns are minimized, but the 25 mm rod and M20x1.5 thread provide excellent rigidity if external guides are omitted.

AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S FAQ

At the maximum 1.0 MPa pressure, it delivers up to 513 kgf.

The rear adjuster screw lets you shorten the effective stroke by up to 75 mm. This creates a usable travel window of 15 to 90 mm, allowing you to set the exact end position without changing the cylinder.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX90-75S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ80BX90-75S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.