verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX900-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 900mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke900 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$475.01 $482.51Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40

The AirTAC SAIJ80X900-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 900 mm travel by up to 40 mm. This yields a precise 860-900 mm usable window for fine-tuning the retract position without swapping hardware. It delivers robust thrust, pushing with 2513 N and pulling with 2268 N at 0.5 MPa, making it suitable for heavy loads.

This unit features a SUS304 stainless steel rod for superior corrosion resistance and operates within a 30-800 mm/s speed range. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40 Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke900 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×900Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40 Is Used

tune

Product Changeover

Dial in the 860-900 mm retract position during line format changes to accommodate different product lengths without adding external stopper blocks.

precision_manufacturing

Machine Setup Calibration

Fine-tune the end-of-stroke position during initial commissioning to perfectly time machine operations, avoiding the need to physically swap cylinders.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40 the Right Cylinder?

If your setup needs less force, stepping down to a 63 mm bore offers 1559 N at 0.5 MPa. The 40 mm adjustment is ideal for product changeovers, letting you shift the retract end-position at commissioning rather than installing external stops. Because the 900 mm stroke is long, an external guide is recommended to manage side loads.

The rear screw acts purely as a travel stop and works alongside the standard air cushions to decelerate the load, but it does not hold the load without live air. For dead-air load holding, consider the SAIL (lock) or BSAI (clamp-lock) series. This SAIJ variant uses PT tapered ports, a SUS304 rod, and no magnet, ensuring dimensionally interchangeable per ISO 15552 mounting.

AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40 FAQ

At 0.7 MPa, the push force increases to 3518 N.

The rear adjuster acts as a stopper that trims the effective travel. For this 900 mm stroke model, you can shorten the stroke by up to 40 mm, creating an adjustable 860-900 mm travel window. It is a stop, not a lock, and requires live air to hold position.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX900-40

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ80BX900-40 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.