verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S

The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX95-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 95mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke95 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$203.29 $210.79Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAIJ80 stroke, mounting and version on one page All SAIJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S

The AirTAC SAIJ80X95-10-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, letting you dial back the 95mm nominal stroke by up to 10mm for a usable 85-95mm travel window. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.

This SKU features a SUS304 stainless steel rod for corrosion resistance and includes a magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. It uses PT tapered ports sized at G3/8, and the 25mm piston rod with an M20x1.5 thread provides a robust interface that handles high side loads, though external guides are still recommended for unsupported loads. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S Technical Specifications

ModelAirtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke95 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2268 N2268 N
0.7 MPa3175 N—
Max (@1.0 MPa)463 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S

SAIISO 15552 profile-barrel cylinder series.
80Bore size in mm.
×95Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S Is Used

settings_input_component

Adjustable End-Positioning

Dial in the exact retract distance within the 85-95mm window during machine setup without swapping out the entire cylinder.

precision_manufacturing

Product Changeover

Quickly adapt the stroke on a packaging or assembly line when product sizes change, using the rear screw for fine tuning.

Is the Airtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S the Right Cylinder?

The adjustable stroke is selected over a fixed SAI cylinder when you need precise end-position tuning at commissioning or during product changeover without adding external stops. For strokes of 300mm or more, external guides are required to manage side load, but at 95mm the 25mm rod handles standard dynamics well. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, use an SAIL pneumatic lock or BSAI clamp-lock cylinder. This profile cylinder is dimensionally interchangeable per ISO 15552.

AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S FAQ

At 0.7MPa the push force increases to 3518N.

The rear adjuster screw lets you shorten the 95mm nominal stroke by up to 10mm, creating a usable travel window of 85-95mm. It acts as a mechanical stop and is not a lock.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAIJ80 Adjustable Cylinder SAIJ80BX95-10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAIJ80BX95-10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.