
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX950-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 950mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a SUS304 stainless steel rod and PT tapered port threads. The integrated -30 adjustment code allows you to fine-tune the effective travel within a 920-950 mm window, perfect for dialing in exact end positions without adding external stops.
Because this 950 mm stroke is substantial, the 25mm rod diameter and M20x1.5 rod thread provide crucial rigidity, though an external guide is still recommended to manage side loads. The rear adjuster acts purely as a travel stop and works alongside variable air cushions at both ends to decelerate the payload smoothly.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX950-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 920-950 mm travel window during product size changes on a packaging line, using the rear screw to set exact endpoints without swapping cylinders.
Actuate large gates or diverters over a 950 mm span, relying on the SUS304 stainless rod to withstand harsh industrial environments.
The adjustable 920-950 mm window is ideal for product changeovers or fine-tuning machine setup at commissioning, replacing the need to swap out a fixed-stroke SAI cylinder. When matching your ISO 15552 replacement, verify the 950mm stroke, 30mm adjustment, PT port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
For a 950mm stroke, always support the load with an external guide rail to prevent excessive side-loading on the rod. Remember that the rear adjuster is a stop, not a lock; this SAIJ cylinder cannot hold a load without live air, so consider an external rod lock or SAIL cylinder if position holding is required.
AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 3518N.
The -30 code means the nominal 950mm stroke can be mechanically shortened by up to 30mm via a rear stopper screw, giving an adjustable travel window of 920-950mm. This stopper only sets the end position; it does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.