
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80BX950-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 950mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X950-50-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 900 to 950 mm, allowing you to dial back the nominal 950 mm stroke by up to 50 mm during machine commissioning.
This unit integrates a SUS304 stainless steel rod for superior corrosion resistance and uses PT tapered port threads. Because the 950 mm stroke exceeds the standard 1500 mm limit for this bore, it is manufactured to order. The extruded aluminum barrel includes sensor grooves on both sides, and the integrated magnet supports CMSE reed and DMSE electronic solid-state switches for precise position feedback.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80BX950-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 900-950 mm travel window during setup to hit exact end-of-stroke positions without adding external physical stops.
Adapt extended-stroke machinery to varying product lengths rapidly by dialing the rear adjuster instead of changing the entire actuator.
Move loads over 950 mm of travel in automated material handling systems where a 25 mm SUS304 rod and adjustable end-stop provide reliable positioning.
Select this 80 mm bore adjustable cylinder when your equipment requires exact end-position tuning without swapping out physical hardware. If you need less force, stepping down to a 63 mm bore yields 1559 N at 0.5 MPa. If your application requires holding a load without live air pressure, note that this rear adjuster acts only as a travel stop, not a lock. You should instead explore an AirTAC SAIL or BSAI series, or utilize an external pilot-operated check valve.
When matching this ISO 15552 interchangeable cylinder for a replacement, verify the 950 mm stroke, 50 mm adjustment range, PT port thread, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, deliberately omitting FB, CA, CB, and CR. Since the stroke is 950 mm, you must use an external guide to prevent side-load damage to the 25 mm rod and M20x1.5 rod thread.
AirtacDistr lists every SAIJ80-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-sus-adjustable-cylinder
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf of push force.
The rear adjuster screw allows you to shorten the effective stroke by up to 50 mm, creating a usable travel window of 900 to 950 mm. This mechanism functions purely as a mechanical stop to set the end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.