
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X75-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X75-20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 55 to 75 mm, allowing you to dial back the nominal 75 mm stroke by up to 20 mm during commissioning without swapping hardware.
This extruded aluminum profile cylinder omits tie-rods and includes sensor grooves on both sides. It uses a PT tapered port thread and a 25 mm carbon steel rod with an M20x1.5 thread, offering robust side-load resistance. The rear stopper sets the retraction end-point, but remember it acts as a travel stop, not a load-holding lock.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reconfigure the 55-75 mm travel window on packaging lines when switching container sizes, ensuring precise end-positioning without mechanical rebuilds.
Fine-tune the retraction point during initial commissioning to perfectly mate tooling, using the rear stopper to trim the 75 mm stroke exactly to the fixture.
The 20 mm adjustment window is ideal for machine setups requiring variable end-stops or product-size changeovers, avoiding the need for fixed-stroke SAI replacements or external stops. To replace this cylinder, match the 80 mm bore, 75 mm stroke, PT port, and mounting style.
For any application needing load holding without live air pressure, a plain SAIJ is insufficient since the rear adjuster and air cushions only decelerate travel. You must integrate an external rod lock, a pilot-operated check valve, or switch to an AirTAC SAIL or BSAI locking cylinder. Standard mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAIJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-saij80-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 3518 N.
The rear adjuster acts as a mechanical stop that trims the effective stroke. For this SAIJ80X75-20, you can shorten the 75 mm nominal stroke by up to 20 mm, creating a usable travel range of 55 to 75 mm. It does not lock the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.