Airtac SC100 Standard Cylinder SC100X1050SH
The AirTAC Airtac SC100 Standard Cylinder SC100X1050SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 1050mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1050 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1050SH
The SC100X1050SH is a double-acting single-rod pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa. With a 100 mm bore and a 1050 mm stroke, it is built for long linear movements in high-temperature environments.
This model features a built-in magnet (-S) for mounting CMSG/DMSG/EMSG sensors directly on the tie-rod barrel, and Viton (FKM) seals (-H) that shift the operating temperature range to 0–150 °C. The 25 mm diameter rod, PT 1/2 port, and 29 mm adjustable air cushion provide reliable deceleration for heavy loads.
Airtac SC100 Standard Cylinder SC100X1050SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1050SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1050 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1050SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1050 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1050SH Is Used
Hot Press & Molding
Viton seals allow this cylinder to operate reliably at 0–150 °C, making it ideal for hot press platens, vulcanizing molds, and thermoforming machines.
High-Temperature Material Handling
The 1050 mm stroke and 3927 N push force at 0.5 MPa suit long-reach pushers or diverters in ovens and drying lines where NBR seals would degrade.
Automated Welding Fixtures
With a built-in magnet for sensor feedback, this cylinder provides reliable end-of-stroke confirmation for clamping and positioning in hot, aggressive welding environments.
Is the Airtac SC100 Standard Cylinder SC100X1050SH the Right Cylinder?
Choose the SC100 bore when your application needs around 3927 N at 0.5 MPa; stepping down to an SC80 bore provides 2513 N, while stepping up to an SC125 delivers 6136 N. For this 1050 mm stroke, ensure the rod is protected from side loads—external guides or a guided cylinder are recommended to prevent rod bending and premature bearing wear.
To replace an existing unit, match five points: 100 mm bore, 1050 mm stroke, PT 1/2 port thread, the built-in magnet (-S), and the Viton seal material. This cylinder is not an ISO 15552 profile; it is a tie-rod design that is shorter than an equivalent ISO 15552 cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1050SH FAQ
At the maximum operating pressure of 1.0 MPa, the theoretical push force is 7068 N. At the standard 0.5 MPa, it delivers 3927 N. The pull force at 0.5 MPa is 3681 N due to the 25 mm rod reducing the piston area on the retract side.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder. It will only directly interchange with another AirTAC SC tie-rod cylinder of the same bore, stroke, port thread, and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1050SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.