Airtac SC100 Standard Cylinder SC100X200
The AirTAC Airtac SC100 Standard Cylinder SC100X200 is a genuine double-acting standard air cylinder with a Ø100mm bore and 200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke200 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X200
The AirTAC SC100X200 is a double-acting tie-rod cylinder delivering substantial force in a compact footprint. With a 100 mm bore, it generates 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa, making it suitable for heavy pressing, clamping, and lifting tasks.
This 200 mm stroke model features a 25 mm diameter piston rod with M20x1.5 threads and PT1/2 ports. The total extended body length is approximately 388 mm, and the adjustable air cushion (29 mm length) decelerates the piston smoothly to reduce end-of-stroke impact.
Airtac SC100 Standard Cylinder SC100X200 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X200 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X200
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X200 Is Used
Pallet Stop & Lift
The 3927 N push force at 0.5 MPa easily raises and stops heavy pallets on conveyor lines, providing reliable material handling in packaging and logistics centers.
Heavy-Duty Clamping
Ideal for welding fixtures and assembly jigs, this 100 mm bore cylinder applies up to 7068 N of clamping force to secure large workpieces during machining or fabrication.
Waste Compactor Actuation
Drives the compaction plate in small to medium waste balers and compactors, using its high force output to compress cardboard, plastics, or other recyclable materials efficiently.
Is the Airtac SC100 Standard Cylinder SC100X200 the Right Cylinder?
For applications requiring less force, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption. If the 200 mm stroke creates a side-load risk, use an external guide or a guided cylinder to protect the rod bearing from bending. The SC100X200 is a genuine AirTAC tie-rod cylinder; when replacing, match the 100 mm bore, 200 mm stroke, PT1/2 port thread, basic mounting, and confirm whether a magnet is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X200 FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100X200 is a double-acting cylinder and will drift or drop if pressure is exhausted or the valve is centered. For load holding without live pressure, you must add a pilot-operated check valve, rod lock, or external brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.