Airtac SC100 Standard Cylinder SC100X105S
The AirTAC Airtac SC100 Standard Cylinder SC100X105S is a genuine double-acting standard air cylinder with a Ø100mm bore and 105mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke105 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X105S
The SC100X105S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 105 mm stroke. At 0.5 MPa it generates a push force of 3927 N, stepping up to 7068 N at the maximum operating pressure of 0.9 MPa, making it a strong actuator for medium-to-heavy linear tasks.
This model includes the factory-fitted -S magnet, so CMSG, DMSG, or EMSG reed and solid-state sensors clamp directly onto the barrel for contactless position sensing. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end deliver smooth deceleration, while the PT1/2 port supplies the working air flow.
Airtac SC100 Standard Cylinder SC100X105S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X105S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X105S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X105S Is Used
Material Handling Gates
The 3927 N push force at 0.5 MPa easily operates diverters and stop gates on medium-duty conveyor lines, with the magnetic piston confirming gate position.
Press-Fit Assembly
Delivers a firm 7068 N at 0.9 MPa for pressing bushings or bearings into housings. The built-in magnet allows end-of-stroke verification to ensure consistent insertion depth.
Pallet Lifting Stations
Suited for lifting and lowering pallets in automated storage systems. The 25 mm rod provides good column strength for vertical pushes within the rated stroke.
Is the Airtac SC100 Standard Cylinder SC100X105S the Right Cylinder?
Choose the SC100 when the SC80's 2513 N push at 0.5 MPa is marginal. If you need even more force, the SC125 delivers 6136 N at the same pressure. For this 105 mm stroke, the standard tie-rod construction handles axial loads well, but always align the rod with the load to avoid side forces.
When replacing an existing cylinder, match five points: 100 mm bore, 105 mm stroke, PT1/2 port thread, the built-in magnet (-S), and the basic (no bracket) mounting. This is a tie-rod cylinder, so it is not dimensionally interchangeable with ISO 15552 profile types.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X105S FAQ
At 0.5 MPa, push force is 3927 N; at 0.7 MPa, it is 5497 N; and at the maximum operating pressure of 0.9 MPa, it reaches 7068 N. The pull force on the retract stroke is slightly lower due to the rod area, delivering 3681 N at 0.5 MPa.
Yes. The -S suffix in SC100X105S means it has a built-in magnet on the piston. You can clamp compatible CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rods to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X105S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.