Airtac SC100 Standard Cylinder SC100X1070S
The AirTAC Airtac SC100 Standard Cylinder SC100X1070S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1070mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1070 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1070S
The AirTAC SC100X1070S is a double-acting, single-rod pneumatic cylinder delivering a substantial 3927 N push force at 0.5 MPa (up to 7068 N at 0.9 MPa). Its 25 mm diameter rod and 29 mm adjustable air cushion provide smooth deceleration for heavy payloads moving through a 1070 mm stroke.
This model features a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for non-contact position sensing. The standard PT1/2 ports and M20x1.5 rod thread ensure straightforward pneumatic connections, with a body length of 188 mm.
Airtac SC100 Standard Cylinder SC100X1070S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1070S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1070 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1070S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1070 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1070S Is Used
Pallet Transfer Systems
The 1070 mm stroke and 3927 N force at 0.5 MPa reliably push heavy pallets between conveyor lanes, with the built-in magnet providing end-of-stroke confirmation.
Automated Panel Pressing
Delivers up to 7068 N at 0.9 MPa for pressing large panels or components, with adjustable cushioning to protect tooling at the end of the long stroke.
Large-Scale Diverter Gates
Operates heavy diverter gates in material handling chutes, where the 29 mm cushion absorbs impact and the magnet sensors verify gate position.
Is the Airtac SC100 Standard Cylinder SC100X1070S the Right Cylinder?
For applications needing more force, stepping up to the 125 mm bore SC125 series provides 6136 N at 0.5 MPa. If a shorter, more rigid setup is acceptable, the 80 mm bore SC80 series offers 2513 N. With a 1070 mm stroke, ensure the rod is protected from side loads; an external guide or guided cylinder is recommended to prevent rod bending and premature bearing wear. When replacing, match bore (100 mm), stroke (1070 mm), PT1/2 ports, the built-in magnet (-S), and the basic mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1070S FAQ
At 0.5 MPa, the push force is 3927 N. At the maximum operating pressure of 0.9 MPa, it increases to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
The -S suffix indicates a magnet is embedded in the piston. This allows AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors to be clamped directly onto the cylinder's tie-rod barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1070S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.