Airtac SC100 Standard Cylinder SC100X1100SH
The AirTAC Airtac SC100 Standard Cylinder SC100X1100SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 1100mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1100 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1100SH
The AirTAC SC100X1100SH is a double-acting single-rod tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa. With a 100 mm bore and 1100 mm stroke, it features a 25 mm diameter piston rod and a 29 mm adjustable air cushion for smooth end-of-stroke deceleration.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors and high-temperature Viton seals (-H), extending the operating range to 0 to +150 °C. The PT1/2 port and M20x1.5 rod thread ensure reliable pneumatic connections in demanding environments.
Airtac SC100 Standard Cylinder SC100X1100SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1100SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1100SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1100SH Is Used
Hot Material Handling
Actuating heavy-duty diverter gates on high-temperature conveyor lines, where the 3927 N force at 0.5 MPa reliably moves large diverters, and Viton seals withstand the heat near ovens or dryers.
Thermoforming Press Clamp
Powering the clamping mechanism on a large thermoforming machine. The 1100 mm stroke provides deep draw depth, while the 0-150°C seal rating handles radiated heat from the forming platens.
Foundry Ejector Ram
Operating a long-throw ejector ram in a foundry shakeout system. The 7068 N peak force at 0.9 MPa ejects heavy castings, and the magnetic piston allows end-of-stroke sensing in a dusty environment.
Is the Airtac SC100 Standard Cylinder SC100X1100SH the Right Cylinder?
Select the SC100 when your application requires a push force around 3927 N at 0.5 MPa. If your load is lighter, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For this 1100 mm stroke, ensure the rod is protected from side loads; use an external guide or linear bearing to prevent rod bending and premature seal wear.
For a direct replacement, match these five points: 100 mm bore, 1100 mm stroke, PT1/2 port thread, the built-in magnet (-S) for sensor compatibility, and the standard basic mounting. This is a genuine AirTAC SC tie-rod cylinder, not an ISO 15552 profile, and is dimensionally shorter than an equivalent ISO cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1100SH FAQ
The theoretical push force at 0.5 MPa is 3927 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The pull force on the retract stroke is 3681 N at 0.5 MPa due to the area of the 25 mm rod.
No. As a standard double-acting cylinder, the SC100X1100SH will not hold its position when air pressure is exhausted or lost. The adjustable air cushion only decelerates the piston at the end of stroke. For static load holding, you must add a pilot-operated check valve or an external mechanical rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1100SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.