Airtac SC100 Standard Cylinder SC100X1100TC
The AirTAC Airtac SC100 Standard Cylinder SC100X1100TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1100mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1100 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1100TC
The AirTAC SC100X1100TC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With an 1100 mm stroke and a 25 mm diameter rod, this model is built for long linear movements where a centre trunnion pivot is required.
This cylinder uses a PT1/2 port and features a 29 mm adjustable air cushion to decelerate the piston smoothly at stroke ends. The TC suffix indicates it ships with the centre trunnion mount and TCM1 bracket (F-SC100TC), allowing the cylinder to swing during operation. Its body length A is 188 mm, giving a total extended length of approximately 1288 mm.
Airtac SC100 Standard Cylinder SC100X1100TC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1100TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1100 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1100TC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1100TC Is Used
Long-Stroke Material Transfer
The 1100 mm stroke and 3927 N push force move heavy pallets or workpieces between distant conveyor stations, with the centre trunnion allowing the cylinder body to pivot freely.
Pivoting Clamp on Large Jigs
Provides strong, controlled clamping force for large automotive or furniture assembly fixtures. The trunnion mount lets the entire cylinder swing into position.
Grain Chute or Diverter Gate Actuation
Operates large diverter gates in agricultural processing. The 7068 N force at 0.9 MPa handles heavy material loads, and the pivoting mount accommodates the gate's arc of motion.
Is the Airtac SC100 Standard Cylinder SC100X1100TC the Right Cylinder?
Choose the SC100X1100TC when your application needs a 100 mm bore force class with a pivoting mount. For lower force needs, step down to the 80 mm bore (2513 N at 0.5 MPa); for higher thrust, the 125 mm bore provides 6136 N. At this 1100 mm stroke, the long, extended 25 mm rod is susceptible to bending under side loads—always use an external guide or rod support, or consider a guided cylinder, to prevent rod bearing damage.
For direct replacement, match five key points: 100 mm bore, 1100 mm stroke, PT port thread, centre trunnion (TC) mounting with its TCM1 bracket, and the absence of a magnet. This tie-rod SC cylinder is not dimensionally interchangeable with ISO 15552 profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1100TC FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
The 25 mm rod on this long 1100 mm stroke is vulnerable to side loads. You must guide the load externally with a linear rail or rod support. Never allow the rod to push or pull an unguided, off-centre load, as this will damage the rod bearing and seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1100TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.