Airtac SC100 Standard Cylinder SC100X110S
The AirTAC Airtac SC100 Standard Cylinder SC100X110S is a genuine double-acting standard air cylinder with a Ø100mm bore and 110mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke110 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X110S
The AirTAC SC100X110S is a double-acting tie-rod cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 110 mm stroke and a 25 mm diameter piston rod, it suits medium-reach clamping, pressing, and material-handling tasks where consistent pneumatic power is required.
This model includes the -S suffix, meaning a built-in magnet is fitted as standard. This allows easy, direct attachment of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for precise, non-contact end-of-stroke or mid-stroke position feedback without extra brackets.
Airtac SC100 Standard Cylinder SC100X110S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X110S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X110S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X110S Is Used
Material Handling
Pushing or diverting boxes and pallets on a conveyor line, using the 3927 N force at standard plant pressure to move heavy items reliably.
Pneumatic Press
Applying up to 7068 N of clamping force at 0.9 MPa for assembly, gluing, or light forming operations in a fixture.
Automated Welding
Positioning and clamping weldments with the built-in magnet sensors confirming cylinder position before the robot cycle starts.
Is the Airtac SC100 Standard Cylinder SC100X110S the Right Cylinder?
For applications needing more force, stepping up to the SC125 bore provides 6136 N of push at 0.5 MPa. If a shorter, more compact build is acceptable, the SC80 bore offers 2513 N at the same pressure. When replacing an existing cylinder, match five points: 100 mm bore, 110 mm stroke, PT port thread, the built-in magnet (-S), and the basic (no bracket) mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X110S FAQ
At the standard operating pressure of 0.5 MPa, this cylinder produces 3927 N extending (push) and 3681 N retracting (pull). At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
Yes. The -S suffix designates a built-in magnetic piston, allowing AirTAC CMSG, DMSG, or EMSG sensors to be clamped directly onto the tie-rod barrel for position sensing without any additional mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.