Airtac SC100 Standard Cylinder SC100X110SN
The AirTAC Airtac SC100 Standard Cylinder SC100X110SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 110mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke110 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X110SN
The SC100X110SN is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa. With a 110 mm stroke and a 25 mm diameter piston rod, this model suits medium-duty clamping and pressing tasks where a compact tie-rod body is preferred.
This unit includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling rod-position feedback without external brackets. The NBR seal (-N) provides reliable sealing for standard industrial air supplies, and the PT1/2 ports keep plumbing straightforward.
Airtac SC100 Standard Cylinder SC100X110SN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X110SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X110SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X110SN Is Used
Automated Clamping
The 3927 N force at 0.5 MPa securely holds steel fabrications during welding or machining, with the magnetic piston confirming clamp engagement via a barrel-mounted sensor.
Part Stops & Diverters
Deploy the 110 mm stroke to raise and lower part stops on a conveyor line. The built-in magnet lets a CMSG sensor verify the stop is fully retracted before the next pallet advances.
Filter Press Actuation
Use the 7068 N thrust at 0.9 MPa to close plates on a small filter press. NBR seals handle the wet, oily air common in food-processing and wastewater environments.
Is the Airtac SC100 Standard Cylinder SC100X110SN the Right Cylinder?
Choose the SC100 bore when your application needs roughly 3900 N of force at standard shop air; if you can accept a smaller envelope, the SC80 bore provides 2513 N at the same pressure. For strokes above 300 mm on this 25 mm rod, consider an external guide or a guided cylinder to protect the rod bearing from side loads.
When replacing an existing cylinder, match five points: 100 mm bore, 110 mm stroke, PT port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting style. This ensures the SC100X110SN drops into the same space and connects to the same control architecture.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X110SN FAQ
At 0.7 MPa (7 bar) the SC100 bore generates 5497 N of push force on the piston. The pull force on the rod side is 3681 N at 0.5 MPa, reduced by the 25 mm rod area.
Yes. The -S suffix means a magnet is built into the piston. You can clamp an AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensor directly onto the barrel tie-rod to detect end-of-stroke position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X110SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.