
The AirTAC SC100 Standard Cylinder SC100X1150 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1150mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1150 is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore, 25 mm piston rod, and an 1150 mm stroke, this model is engineered for applications requiring substantial linear force over a long travel distance.
This tie-rod cylinder features a body length of 188 mm and an adjustable pneumatic cushion of 29 mm at each end to decelerate the piston smoothly. The standard PT1/2 ports and M20x1.5 rod thread ensure straightforward integration, while the TPU seals provide reliable operation within a temperature range of -20 to +70 °C.
| Model | Airtac SC100 Standard Cylinder SC100X1150 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1150 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves heavy pallets or totes across conveyor junctions with the 3927 N push force at standard line pressure, ensuring reliable material flow in distribution centers.
Provides up to 7068 N of clamping force at 0.9 MPa for securing large workpieces during welding, machining, or assembly operations on automotive frames.
Extends 1150 mm to push rows of packages or tires onto sortation lanes, leveraging the robust 25 mm rod to handle repetitive, high-cycle industrial tasks.
Select the SC100 when your application needs a force step up from the SC80 (2513 N at 0.5 MPa), offering a significant 56% increase in push capacity. For even higher forces, consider the SC125 which provides 6136 N at the same pressure. For this 1150 mm stroke, careful alignment is critical; long, unsupported rods are susceptible to bending under side loads, so always use an external guide mechanism or ensure the load is perfectly axial to prevent premature rod bearing wear and seal failure.
To replace an existing cylinder, match five key points: 100 mm bore, 1150 mm stroke, PT1/2 port thread, basic mounting (no included bracket), and the absence of a built-in magnet. This model is a direct replacement for another AirTAC SC100X1150 tie-rod cylinder with the same configuration.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa (approximately 72.5 psi), the push force is 3927 N. At the common industrial pressure of 0.7 MPa, it increases to 5497 N. The maximum operating force at 0.9 MPa is 7068 N.
No. The SC100X1150 is a double-acting cylinder that requires continuous air pressure to maintain its position. If pressure is exhausted or a directional valve is centered, the piston rod can drift or drop. For load-holding safety, you must add an external rod brake or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.