Airtac SC100 Standard Cylinder SC100X1150S
The AirTAC Airtac SC100 Standard Cylinder SC100X1150S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1150mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1150 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1150S
The AirTAC SC100X1150S is a double-acting single-rod pneumatic cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 1150 mm stroke is within the standard range for the 100 mm bore, making it a strong candidate for long-travel material transfer or lifting applications.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for reliable end-of-stroke detection. The 25 mm diameter piston rod and PT1/2 port provide robust fluid flow, while the 29 mm adjustable air cushion at each end decelerates the piston smoothly, protecting the end caps during high-speed operation.
Airtac SC100 Standard Cylinder SC100X1150S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1150S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1150 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1150S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1150S Is Used
Long-Stroke Material Transfer
Pushes heavy pallets or components across a 1150 mm distance on a conveyor transfer station, with sensors confirming full extension and retraction.
Automotive Body-in-White Clamping
Provides the high force and long reach needed for clamping large automotive sub-assemblies in a framing station, where magnetic sensors verify clamp position.
Baler & Compactor Ejection
Ejects compacted waste bales from a large industrial compactor, using the full 1150 mm stroke to clear the chamber completely.
Is the Airtac SC100 Standard Cylinder SC100X1150S the Right Cylinder?
Choose the SC100X1150S when your application needs approximately 4000 N of force at standard shop air. If you can accept a smaller footprint and lower force, stepping down to an 80 mm bore reduces push force to 2513 N at 0.5 MPa. For heavier loads, the 125 mm bore offers 6136 N at the same pressure. At 1150 mm stroke, ensure the rod is protected from side loads; use an external guide rail or a guided cylinder if the load is not perfectly axially aligned. For a direct replacement, match bore, stroke, PT1/2 port thread, the basic mounting style, and the integrated magnet (-S) for sensor compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1150S FAQ
At 0.5 MPa (5 bar), the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet in the piston, making it compatible with AirTAC CMSG (reed), DMSG (solid-state), and EMSG (explosion-proof) sensors that clamp directly onto the tie-rod barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.