verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X1150SH

The AirTAC SC100 Standard Cylinder SC100X1150SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 1150mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke1150 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$335.69 $343.19Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X1150SH

The SC100X1150SH is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and an 1150 mm stroke, it features a 25 mm diameter piston rod and a 29 mm adjustable air cushion at each end to decelerate the piston smoothly.

This model includes a built-in magnet (-S suffix) for mounting CMSG, DMSG, or EMSG sensors directly on the tie-rod barrel, enabling non-contact position sensing. The -H suffix specifies Viton (FKM) seals, extending the operating temperature range from the standard -20 to +70 °C up to 0 to +150 °C, making it suitable for hot or aggressive environments.

Airtac SC100 Standard Cylinder SC100X1150SH Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X1150SH
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke1150 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X1150SH

SCStandard tie-rod cylinder series.
100Bore size in mm.
×1150Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X1150SH Is Used

conveyor_belt

Material Handling Pusher

The 7068 N push force at 0.9 MPa handles heavy palletizing and transfer stations on conveyor lines, with sensor-ready positioning for precise end-of-stroke confirmation.

precision_manufacturing

Hot Press Actuation

Viton seals rated to 150°C allow this cylinder to operate reliably in heated platen presses for laminating, thermoforming, or composite curing applications.

engineering

Industrial Gate Valve Drive

Provides the high thrust and long 1150 mm travel needed to open and close large gate valves in processing plants, with magnetic sensors confirming open/closed status.

Is the Airtac SC100 Standard Cylinder SC100X1150SH the Right Cylinder?

Choose the SC100 bore when the 0.5 MPa push force of 3927 N matches the load; for lighter applications, the SC80 bore provides 2513 N at the same pressure. This 1150 mm stroke is within the 1500 mm maximum standard stroke for the 100 mm bore. For long strokes, ensure the rod is not subjected to side loading, which can cause bending and premature seal wear—use an external guide or a guided cylinder if side forces are present.

When replacing an existing cylinder, match five key points: 100 mm bore, 1150 mm stroke, PT port thread, the built-in magnet for sensors, and the Viton seal material. This SC model is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X1150SH FAQ

At the standard 0.7 MPa operating pressure, the cylinder provides 5497 N of push force and 3681 N of pull force (retracting). The maximum push force at 0.9 MPa is 7068 N.

No, the SC100X1150SH is a double-acting cylinder and will not hold its position if air pressure is lost or the directional valve is centered. For load holding, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve in the circuit.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X1150SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X1150SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.