
The AirTAC SC100 Standard Cylinder SC100X120 is a genuine double-acting standard air cylinder with a Ø100mm bore and 120mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X120 is a 100 mm bore, 120 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. At 0.5 MPa it generates 3927 N pushing force and 3681 N pulling force, placing it in the 800-kgf class for medium-heavy industrial actuation. The unit uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 ports, and its adjustable air cushion provides a 29 mm deceleration zone at each end.
With a body length A of 188 mm, the total extended length is approximately 308 mm. This model is built with standard TPU seals for a -20 to +70 °C operating range and PT port threads. The 120 mm stroke is well within the 1500 mm maximum standard stroke for the 100 mm bore, making this a stock-configuration actuator ready for immediate despatch.
| Model | Airtac SC100 Standard Cylinder SC100X120 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa reliably raises and lowers heavy pallet stops or lane gates on gravity and powered conveyor lines.
Delivers up to 7068 N at 0.9 MPa for holding large workpieces during welding, assembly, or woodworking glue-up operations.
Actuates sliding gates on agricultural bins or aggregate hoppers, providing the force to shear through settled material.
Choose the SC100 bore when your application needs roughly 4000 N of force at standard shop air. If you can accept a smaller actuator, stepping down to an SC80 (2513 N push at 0.5 MPa) saves space and air consumption. For higher force, the SC125 bore delivers 6136 N at the same pressure. This 120 mm stroke model does not require an external guide for purely axial loads, but any side load must be managed with an external guide rail or rod bearing, as the 25 mm rod is not designed to support bending moments.
To replace an existing cylinder, match five points exactly: 100 mm bore, 120 mm stroke, PT1/2 port thread, basic (no mounting accessory), and no magnet. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.7 MPa (7 bar) the SC100X120 produces 5497 N of pushing force and 3681 N of pulling force. The maximum operating force at 0.9 MPa is 7068 N push.
No. The SC100X120 is a double-acting cylinder and will drift or drop if air pressure is exhausted or the directional valve is centred. To hold a load or position without live pressure, you must add a pilot-operated check valve, external rod lock, or mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.