
The AirTAC SC100 Standard Cylinder SC100X1200 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1200 is a double-acting tie-rod cylinder delivering a substantial 3927 N push force at 0.5 MPa (7068 N at the 0.9 MPa maximum operating pressure). With a 100 mm bore and a 1200 mm stroke, it is built for linear applications that require both high force and extended reach, such as pressing, clamping, or lifting heavy assemblies.
This model uses a 25 mm diameter piston rod with M20x1.5 threads and PT1/2 ports. The body length A is 188 mm, giving a total extended length of approximately 1388 mm. An adjustable air cushion (29 mm length) decelerates the piston at stroke end to reduce impact, while the standard TPU seals suit operating temperatures from -20 to +70 °C.
| Model | Airtac SC100 Standard Cylinder SC100X1200 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves heavy pallets or skids across transfer stations with the 3927 N push force, handling the weight of loaded logistics carriers reliably.
Applies up to 7068 N of force at 0.9 MPa for pressing bearings, bushings, or assembly components into place on a production line.
Opens and closes heavy hopper gates or HVAC dampers, using the long 1200 mm stroke to achieve full travel in bulk material handling.
Select the SC100 when your application needs roughly 4000 N of force at standard plant pressure. If you can accept a smaller footprint, the SC80 bore provides 2513 N at 0.5 MPa; for heavier loads, the SC125 steps up to 6136 N. Always confirm the force requirement with a safety margin before finalising the bore.
For this 1200 mm stroke, side-load management is critical. A long, unsupported 25 mm rod can bend under lateral force, leading to premature bearing wear or seal failure. Use an external linear guide or a guided cylinder configuration to absorb side loads and protect the rod bearing. When replacing an existing cylinder, match five points: 100 mm bore, 1200 mm stroke, PT1/2 port thread, the specific mounting accessory (if any), and whether a magnet is needed for sensors.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100 is a double-acting cylinder and does not lock or hold position without live air pressure. If the air supply is cut or the directional valve is centred, the piston can drift. You must add an external rod brake, a pilot-operated check valve, or a mechanical lock for load-holding safety.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.