
The AirTAC SC100 Standard Cylinder SC100X1200S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1200S is a double-acting pneumatic cylinder delivering a push force of 3927 N at 0.5 MPa (7068 N at 0.9 MPa), making it a powerful actuator for heavy linear tasks. Its 1200 mm stroke is within the standard range for the 100 mm bore, and the built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors for precise end-of-stroke detection.
This tie-rod cylinder features a 25 mm diameter piston rod, PT1/2 ports, and an adjustable air cushion of 29 mm at each end to decelerate the load smoothly. The total body length A is 188 mm, giving an extended length of approximately 1388 mm. As a genuine AirTAC SC series unit, it provides a compact, non-ISO 15552 solution for demanding automation environments.
| Model | Airtac SC100 Standard Cylinder SC100X1200S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa easily moves heavy pallets across roller conveyors, with the 1200 mm stroke covering full transfer distances in a single motion.
Ejects large stamped or molded parts from heavy tooling. The built-in magnet sensor confirms full retraction before the next press cycle, ensuring safe, interlocked operation.
Operates material diverter gates or hopper doors in bulk handling. The adjustable cushion absorbs the kinetic energy of the heavy gate, preventing impact damage at stroke end.
Choose the SC100 bore when your application requires a push force around 3927 N at 0.5 MPa. If your load is lighter, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and cost. For a 1200 mm stroke, ensure the load is guided externally; a 25 mm rod at this extension is vulnerable to bending under side loads, and an external guide or a guided cylinder is strongly recommended to protect the rod bearings and seals.
For a direct replacement, match five key points: 100 mm bore, 1200 mm stroke, PT1/2 port thread, the built-in magnet (-S suffix), and the basic mounting style. This model is a standard tie-rod cylinder and is dimensionally interchangeable only with another AirTAC SC100 of the same configuration.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100X1200S is a double-acting cylinder and will not hold its position if air pressure is exhausted or the directional valve is centered. The piston will drift or the load will drop. For load holding, you must add a pilot-operated check valve or an external mechanical rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.