
The AirTAC SC100 Standard Cylinder SC100X1200STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1200STC is a double-acting single-rod tie-rod cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 25 mm diameter rod and a 1200 mm stroke, it is built for long linear movements where a compact body length of 188 mm keeps the footprint manageable.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and the TC centre trunnion mount (supplied with TCM1 bracket, order code F-SC100TC) allows the cylinder to pivot during operation. The adjustable air cushion (29 mm length) decelerates the piston smoothly at end-of-stroke, protecting the end caps from impact.
| Model | Airtac SC100 Standard Cylinder SC100X1200STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes or pulls heavy pallets and product carriers across 1200 mm on packaging and assembly lines, with trunnion mounting absorbing misalignment.
Provides 3927 N of clamping force at 0.5 MPa for large woodworking or metalworking jigs, with sensor confirmation of jaw position via the built-in magnet.
Operates chutes, gates, or diverters on harvesters and spreaders, where the pivoting TC mount accommodates the motion of the linkage.
For a 1200 mm stroke, the 25 mm rod requires careful management of side loads to prevent bending or premature bearing wear. Always use an external guide or ensure the load is perfectly axial; if side forces are unavoidable, consider a guided cylinder configuration. When replacing an existing unit, match five points: 100 mm bore, 1200 mm stroke, PT port thread, TC centre trunnion mounting, and the built-in magnet for sensor compatibility.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa air pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N.
No. The SC100 is a double-acting cylinder; it does not lock or hold position when pressure is exhausted or the valve centers. For load holding without live pressure, an external rod brake or pilot-operated check valve is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.