
The AirTAC SC100 Standard Cylinder SC100X1200TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1200mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1200TC is a double-acting tie-rod cylinder delivering a substantial 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and a 1200 mm stroke, it is built for long linear movements where a pivoting mount is required—the integrated centre trunnion (TC) allows the cylinder body to swing through an arc, preventing rod bending in guided linkages.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 ports. The adjustable air cushion (29 mm length) decelerates the piston near stroke end to reduce impact. Body length A is 188 mm, giving an approximate extended length of 1388 mm. The standard TPU seals suit operating temperatures from -20 to +70 °C.
| Model | Airtac SC100 Standard Cylinder SC100X1200TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves heavy tooling or workpieces across a 1200 mm span on linear slides, using the trunnion mount to accommodate slight misalignment in the linkage.
Operates a large diverter gate on a conveyor line. The centre trunnion allows the cylinder body to pivot as the gate swings through its arc.
Raises and lowers a large safety guard on a stamping press. The 7068 N push force at 0.9 MPa easily handles heavy steel mesh guards.
Choose the SC100 bore when your application needs between 3927 N (push at 0.5 MPa) and 7068 N (push at 0.9 MPa). If your load is lower, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For higher forces, the 125 mm bore provides 6136 N at 0.5 MPa.
At 1200 mm stroke, side-load management is critical. An unsupported 25 mm rod at full extension is vulnerable to bending under even small lateral forces. Use an external linear guide or a guided-cylinder arrangement to protect the rod bearings and seals. For direct replacement, match five points exactly: 100 mm bore, 1200 mm stroke, PT1/2 ports, centre trunnion (TC) mount with F-SC100TC bracket, and no magnet option.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf. Always apply a safety factor for dynamic loads.
Only if your existing cylinder also uses a centre trunnion mount. The TC suffix means this cylinder ships with the trunnion bracket (F-SC100TC) for pivoting installation. If your old cylinder is foot-mounted (LB) or flange-mounted (FA/FB), you need the matching suffix—otherwise the mounting points will not align.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.