
The AirTAC SC100 Standard Cylinder SC100X120H is a genuine double-acting standard air cylinder with a Ø100mm bore and 120mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X120H is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, featuring a 100 mm bore and a 120 mm standard stroke. With a push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa, it handles heavy clamping and pressing tasks. The 25 mm diameter piston rod and 29 mm adjustable air cushion ensure robust, decelerated end-of-stroke performance.
This variant is equipped with Viton (FKM) seals, extending the operating temperature range to 0–150 °C, making it suitable for high-temperature or chemically aggressive environments. The total extended body length is approximately 308 mm (188 mm body length A + 120 mm stroke). Ports are PT1/2 threads for standard pneumatic connections.
| Model | Airtac SC100 Standard Cylinder SC100X120H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
With Viton seals rated for 0–150 °C, this cylinder is ideal for clamping fixtures in autoclaves, drying ovens, or near heat-sealing bars where standard seals would degrade.
Delivering up to 7068 N of force at 0.9 MPa, the SC100X120H provides the power needed for short-stroke pressing, riveting, and stamping operations in metalworking cells.
Use this 120 mm stroke cylinder to actuate heavy diverter gates or stoppers on conveyor lines, especially in foundries or heat-treatment facilities where ambient temperatures are elevated.
Choose the SC100 when your application requires between 3927 N and 7068 N of push force. For slightly lower force needs around 2513 N, the SC80 bore may reduce air consumption and cost. For higher forces up to 11045 N, step up to the SC125. Always ensure the load is guided externally if side forces are present, as the rod bearing is not designed to support lateral loads.
For a direct replacement, match five key specifications: 100 mm bore, 120 mm stroke, PT port threads, basic mounting (no factory bracket), and no magnet. This model uses Viton seals for high-temperature operation; ensure the replacement matches this seal material if the working environment exceeds 70 °C.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The SC100X120H is a double-acting cylinder and will not hold its position if air pressure is exhausted or lost. The piston can drift or drop under load. For load holding, you must add an external rod lock, a pilot-operated check valve, or use a mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.