
The AirTAC SC100 Standard Cylinder SC100X120S is a genuine double-acting standard air cylinder with a Ø100mm bore and 120mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X120S is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa), making it a robust actuator for medium-to-heavy industrial tasks. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration across the 120 mm stroke, while the built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors for precise position feedback.
With a compact body length of 188 mm (total extended length approx. 308 mm), this genuine AirTAC tie-rod cylinder fits into spaces where an ISO 15552 profile would be too long. The SC100X120S operates on filtered air from 0.15 to 1.0 MPa and uses standard PT1/2 ports, ensuring straightforward integration into existing pneumatic circuits.
| Model | Airtac SC100 Standard Cylinder SC100X120S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa easily actuates heavy diverter gates on packaging and sortation conveyors. The built-in magnet sensor confirms gate position for reliable automated sequencing.
Delivers up to 7068 N at 0.9 MPa for controlled press-fit insertion of bearings or bushings. The adjustable cushion protects the assembly tooling from impact damage at the end of the 120 mm stroke.
Ideal for raising or stopping heavy pallets in material handling lines. The 25 mm rod and tie-rod construction handle repetitive impact loads, while the magnetic piston enables end-of-stroke detection.
Choose the SC100 bore when your application needs around 3900 N of force at 0.5 MPa. If you require roughly 2500 N, step down to the SC80 bore; for heavy pushing above 6100 N at 0.5 MPa, the SC125 bore is the next logical step. Always match replacement cylinders on five points: bore (100 mm), stroke (120 mm), port thread (PT), mounting accessory (basic), and the magnet option (-S suffix).
For this 120 mm stroke, the 25 mm rod is well-supported against side loads under normal conditions. However, if the load is guided externally or the cylinder is used in a purely axial push-pull arrangement, service life will be maximized. Always ensure the rod is not subjected to bending moments.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet on the piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.