
The AirTAC SC100 Standard Cylinder SC100X120SFB is a genuine double-acting standard air cylinder with a Ø100mm bore and 120mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X120SFB is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the 0.9 MPa maximum operating pressure. Its 120 mm stroke is well within the 1500 mm standard maximum for the 100 mm bore, making this a readily available configuration for medium-travel linear actuation.
This model includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke or mid-position detection without external brackets. The FB suffix designates a rear rectangular flange (F-SC100FB), which bolts rigidly to the cap end for secure panel or machine-frame mounting. With a 25 mm diameter rod and PT1/2 ports, it handles substantial side loads when the stroke is kept short.
| Model | Airtac SC100 Standard Cylinder SC100X120SFB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 120 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×120 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa easily diverts or indexes boxes and pallets on conveyor lines. The rear flange mount anchors the cylinder firmly to the conveyor frame.
Delivers up to 7068 N of clamping force for CNC fixtures and welding jigs. The built-in magnet confirms clamp engagement before the cycle starts.
Ideal for bearing insertion or light press-fit tasks. The rigid FB mount resists reaction forces, while the 25 mm rod withstands the compressive load.
For applications needing slightly less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while the 125 mm bore steps up to 6136 N. This 120 mm stroke keeps the rod well-supported within the bearing; for strokes exceeding 300 mm, always evaluate side-load bending moments and consider an external guide or a guided cylinder to protect the rod bearing and seals. To match this cylinder for replacement, confirm five points: 100 mm bore, 120 mm stroke, PT port thread, rear flange FB mounting (F-SC100FB), and the built-in magnet (-S) for sensor compatibility.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, it produces 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet, so you can directly clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors onto the barrel to detect piston position without any additional mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.