
The AirTAC SC100 Standard Cylinder SC100X1220 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1220mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1220 is a double-acting tie-rod cylinder with a 100 mm bore and a 1220 mm stroke, delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. Its 25 mm diameter piston rod and 29 mm adjustable air cushion at each end provide smooth deceleration for medium-to-heavy linear motion tasks.
This model uses the standard PT1/2 port thread and TPU seals for operation in ambient temperatures from -20 to +70 °C. With a body length A of 188 mm, the total extended length is approximately 1408 mm, making it a genuine AirTAC solution for long-stroke applications within the 1500 mm maximum standard stroke limit for the 100 mm bore.
| Model | Airtac SC100 Standard Cylinder SC100X1220 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1220 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves heavy pallets or components across a 1220 mm span on linear transfer stations, where the 3927 N push force at 0.5 MPa reliably shifts loads without needing maximum system pressure.
Provides the long, controlled stroke needed in laminating or clamping presses, using the adjustable cushion to gently bring the platen to a stop against the workpiece.
Actuates large diverter gates on gravity or powered roller conveyors, where the 1220 mm stroke gives full gate clearance and the tie-rod design withstands the repetitive impact environment.
For higher force requirements, stepping up to the SC125 bore provides 6136 N of push force at 0.5 MPa. If a lighter, more compact cylinder is sufficient, the SC80 bore delivers 2513 N at the same pressure. Always match the replacement cylinder on all five critical points: 100 mm bore, 1220 mm stroke, PT1/2 port thread, basic (no) mounting, and no magnet.
At a 1220 mm stroke, the unsupported piston rod is susceptible to bending under side loads. To prevent premature seal and bearing wear, use an external guide rail or a guided cylinder assembly to absorb any transverse forces, ensuring the rod operates purely in tension and compression.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
A stroke of 1220 mm on a 25 mm rod creates a significant moment arm for side loads. You must guide the load externally with a linear rail or rod guide, or switch to a guided cylinder configuration. Never allow the rod to take transverse forces directly, as this will damage the rod bearing and seals.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.