
The AirTAC SC100 Standard Cylinder SC100X1250 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1250mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1250 is a double-acting pneumatic cylinder delivering a substantial 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 25 mm piston rod, this tie-rod cylinder is built for demanding linear applications requiring a long 1250 mm stroke.
Its adjustable air cushion (29 mm length) decelerates the piston smoothly at both ends of the stroke, protecting end caps and reducing noise. The body length A is 188 mm, making the total extended length approximately 1438 mm. This model uses a standard PT1/2 port and is fitted with TPU seals for a standard operating temperature range of -20 to +70 °C.
| Model | Airtac SC100 Standard Cylinder SC100X1250 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1250 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides the long 1250 mm reach needed to push heavy pallets or product stacks off a conveyor line, with 3927 N of force at standard shop air pressure.
Delivers up to 7068 N of clamping force at 0.9 MPa for securing large weldments or structural components during fabrication processes.
Powers the long-stroke movement on a large bale handler or silage compactor, reliably operating with filtered compressed air in dusty environments.
This 100 mm bore cylinder is ideal when the 50 mm bore's 982 N force at 0.5 MPa is insufficient. If your application requires even greater thrust, stepping up to the 125 mm bore provides 6136 N at the same pressure. For this 1250 mm stroke, careful mounting alignment is critical; the long, unsupported 25 mm rod can be susceptible to bending under side loads. Consider an external guide rail or a guided cylinder configuration if the load is not purely axial. When replacing, ensure a match on all five points: 100 mm bore, 1250 mm stroke, PT1/2 port thread, basic mounting, and the absence of a magnet.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. The maximum push force at the 0.9 MPa operating limit is 7068 N, which corresponds to a theoretical maximum of 801 kgf at 1.0 MPa.
For strokes of 300 mm or more, the extended piston rod is vulnerable to bending under side load. Always align the load axially with the rod, and for any non-axial force, use an external linear guide or switch to a guided cylinder to prevent premature rod bearing and seal wear.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.