
The AirTAC SC100 Standard Cylinder SC100X1250SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 1250mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1250SH is a double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 25 mm rod and 29 mm adjustable air cushion handle long 1250 mm strokes smoothly, while the built-in magnet allows direct mounting of CMSG/DMSG/EMSG sensors for reliable end-of-stroke detection.
This model features Viton (FKM) seals, extending the operating temperature range to 0–150 °C for hot environments. The PT1/2 port and M20x1.5 rod thread suit standard pneumatic connections, and the 188 mm body length keeps the overall extended length to approximately 1438 mm.
| Model | Airtac SC100 Standard Cylinder SC100X1250SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1250 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Viton seals permit continuous operation up to 150 °C, making this cylinder ideal for foundry actuators, autoclave door drives, and drying-line pushers where standard seals would degrade.
The 1250 mm stroke and 7068 N thrust at 0.9 MPa move heavy pallets or panels across wide transfer stations, with magnetic sensors confirming full extension and retraction.
In glass or ceramics plants, this cylinder diverts product on conveyors near kilns. The adjustable cushion prevents impact damage, and the sensor magnet enables precise timing control.
Choose the SC100 when your application needs around 3927 N at 0.5 MPa; step down to the SC80 (2513 N) if space or force requirements are lower, or up to the SC125 (6136 N) for heavier loads. For this 1250 mm stroke, side-load management is critical—use an external guide or a guided cylinder to protect the rod bearing from bending moments.
To replace an existing cylinder, match five points: 100 mm bore, 1250 mm stroke, PT1/2 port thread, the -S magnet for sensor mounting, and the Viton seal for high-temperature compatibility. Always verify the tie-rod mounting footprint, as the SC series is shorter than ISO 15552 profiles.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, it produces 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder with a shorter body length than ISO 15552 profiles, so mounting dimensions differ. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder with matching stroke, port thread, magnet option, and seal material.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.