
The AirTAC SC100 Standard Cylinder SC100X1250STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1250mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1250STC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. Its 100 mm bore and 1250 mm stroke suit long-travel linear applications requiring substantial force, such as heavy-duty material transfer or large-scale clamping.
This model features a built-in magnet for mounting CMSG/DMSG/EMSG sensors directly on the tie-rod barrel, enabling precise end-of-stroke detection. It is supplied with a TC centre trunnion pivot mount (including the TCM1 bracket, part code F-SC100TC) for applications where the cylinder body must swing through an arc. The 25 mm diameter piston rod provides robust push-pull capability, while the 29 mm adjustable air cushion at each end decelerates the load smoothly.
| Model | Airtac SC100 Standard Cylinder SC100X1250STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1250 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1250 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes 1.25-meter-long pallets or heavy totes across roller conveyors in automated logistics hubs, using the trunnion mount to pivot freely as the load transfers.
Operates clamping arms on large welding jigs for automotive or agricultural frames, with magnetic sensors confirming clamp position before the weld cycle starts.
Provides the long, high-force stroke needed to compact recyclable materials in a horizontal baler, with the adjustable cushion absorbing impact at the end of the compaction cycle.
For applications needing more force, consider stepping up to the SC125 bore (6136 N push at 0.5 MPa). If a shorter, more compact cylinder is acceptable, the SC80 bore offers 2513 N push at 0.5 MPa. This 1250 mm stroke is within the 1500 mm maximum standard stroke for the 100 mm bore.
At this stroke length, the 25 mm rod is susceptible to bending under side loads. Always guide the load externally with rails or rods, or use a guided cylinder variant, to prevent rod bearing damage and ensure linear motion. For direct replacement, match the 100 mm bore, 1250 mm stroke, PT port thread, TC centre trunnion mount, and the integrated magnet (-S) sensor compatibility.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder and is shorter than an ISO 15552 cylinder, so it is not dimensionally interchangeable. You must replace it with another AirTAC SC tie-rod cylinder of the same bore, stroke, PT port, TC mount, and magnet option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.